October 22, 2019
South Norfolk Council & Broadland District Council, as part of their collaboration, have launched a business awards campaign to celebrate the economic success of the district and CNC Building Control are proud to be sponsoring the “New Business” Award. Building on the success of the 2019 South Norfolk Business Awards they will celebrate the excellence,...
> Read moreOctober 7, 2019
CNC Building Control, as part of their 2019 CPD programme, are offering a free seminar on “Condensation in the Roofspace”. The presentation is being delivered by Tom Tye, Regional Manager, of the Proctor Group. This presentation is designed for Architects, Builders and Specifiers and discusses the requirements for breather membranes, air barriers and vapour control...
> Read moreAugust 8, 2019
As part of our 2019 CPD programme of events, we at CNC Building Control, are offering another FREE CPD seminar. This seminar, which is being held at two locations on Thursday, 26th September, is an introduction to ‘Passive Fire Protection’. The presentation is being delivered by a leading designer and manufacturer of passive fire protection products,...
> Read moreJuly 1, 2019
Some Approved Inspectors have recently been unable to obtain the required insurance cover, you can check the status of insurance for any Approved Inspector by following this link to the CICAIR website – https://www.cicair.org.uk/ What does this mean to you? Without insurance an Approved Inspector is unable to carry out their building control functions...
> Read moreJune 7, 2019
Matthew Kerrison recently joined CNC Building Control as a Building Control Surveyor. He started his career as a Building Surveyor undertaking demolition, refurbishment and management surveys for both domestic and commercial building. He subsequently moved into Building Control and has for the past 3 1/2 years been working for an local Approved Inspector. As well as being...
> Read moreMay 31, 2019
As part of our 2019 CPD programme of events, we are offering another 2 FREE CPD seminars. This seminar is taking place in early July and will cover ‘Ground Heave, Voc & Ground Gas Protection and Structural Fill Solutions’. The presentation is being delivered by Simon Roberts from Cordek. Cordek were formed in 1973 and...
> Read moreMarch 27, 2019
Are you an experience Building Control Surveyor looking for your next career move? Look no further! We are actively searching for an experience Surveyor based in our head office in Long Stratton. Salary : £35,000 to £50,000 Per annum + up to £5,000 phased Golden Hello Location : Long Stratton (close to Norwich) Contract Type...
> Read moreFebruary 1, 2019
At CNC Building Control we like to invest in our clients which is why we hold regular seminars throughout the year on Building Control related subjects. Our next seminar ‘How to Achieve Compliance for Parts L & F of the Approved Documents’ is being delivered by Tom Reynolds a Director of MES Building Solutions. MES is...
> Read moreDecember 19, 2018
CNC Building Control are pleased to announce, following an annual review of prices, that the majority of their charges will be held at present levels. However, there will be a small increase in six of their fee categories. The increases will apply to any full plans application and building notice submitted on or after 2nd...
> Read moreDecember 7, 2018
At CNC Building Control we like to invest in our clients which is why we hold regular seminars throughout the year on Building Control related subjects. Our next two seminar ‘Acoustics in Education ‘ and ‘Ceiling Design & Room Acoustics’ are being delivered by Melissa Davies, East Anglia Area Manager, from Saint-Gobain Ecophon. Saint-Gobain Ecophon are...
> Read more