Covid 19 Update

June 29, 2020

CNC Building Control remains open and undertaking our statutory function during these very challenging times. Please note, however,  that our offices in both Long Stratton and Wisbech remain, in line with Government recommendations, unstaffed and so we are therefore unable to accept ‘drop in calls’.    If you would like to speak to a Building...

> Read more

CNC Site Inspection Policy – Covid 19 latest Update

March 20, 2020

CNC Building Control remains open and appropriately staffed to ensure that our statutory function continues during these very challenging times.  However, we will only continue to undertake the following inspections in line with the latest guidance for protection for both themselves, and the public,  against Covid 19. Below is a list of inspection type we...

> Read more

Sound Advice on Approved Document E – Free CPD Seminar

January 6, 2020

CNC Building Control, as part of their 2020 CPD programme, are offering a free seminar on “Acoustics and Approved Document E”.   The presentation is being delivered by Adrian James, Director of Adrian James Acoustics. This presentation is designed for Architects, Builders and Specifiers and will cover :- * Aims of Approved Document E * How...

> Read more

CNC Supporting Local Companies

October 22, 2019

South Norfolk Council & Broadland District Council, as part of their collaboration, have launched a business awards campaign to celebrate the economic success of the district and CNC Building Control are proud to be sponsoring the “New Business” Award. Building on the success of the 2019 South Norfolk Business Awards they will celebrate the excellence,...

> Read more

Condensation in the Roofspace – Free CPD Seminar on 7th November 2019

October 7, 2019

CNC Building Control, as part of their 2019 CPD programme, are offering a free seminar on “Condensation in the Roofspace”.   The presentation is being delivered by Tom Tye, Regional Manager, of  the Proctor Group. This presentation is designed for Architects, Builders and Specifiers and discusses the requirements for breather membranes, air barriers and vapour control...

> Read more

Introduction to Passive Fire Protection – Free CPD Seminar

August 8, 2019

As part of our 2019 CPD programme of events, we at CNC Building Control, are offering another FREE CPD seminar.   This seminar, which is being held at two locations on Thursday, 26th September, is  an introduction to ‘Passive Fire Protection’.  The presentation is being delivered by a leading designer and manufacturer of passive fire protection products,...

> Read more

Approved Inspector Reversions

July 1, 2019

Some Approved Inspectors have recently been unable to obtain the required insurance cover, you can check the status of insurance for any Approved Inspector by following this link to the CICAIR website – What does this mean to you?   Without insurance an Approved Inspector is unable to carry out their building control functions...

> Read more

Matthew joins the CNC Surveying Team

June 7, 2019

Matthew Kerrison recently joined CNC Building Control as a Building Control Surveyor. He started his career as a Building Surveyor undertaking demolition, refurbishment and management surveys for both domestic and commercial building.   He subsequently moved into Building Control and has for the past 3 1/2 years been working for an local Approved Inspector. As well as being...

> Read more

Vacancy – Building Control Surveyor

March 27, 2019

Are you an experience Building Control Surveyor looking for your next career move?  Look no further! We are actively searching  for an experience Surveyor based in our head office in Long Stratton. Salary : £35,000 to £50,000 Per annum + up to £5,000 phased Golden Hello Location : Long Stratton (close to Norwich) Contract Type...

> Read more